COARSE ABRASIVE POLISHING PASTE WHITE CORK 250G

ITALKO BRAND

This is the strongest polishing paste from the entire line of ITALKO polishing products.

The product is characterized by coarse grain, making it ideal for polishing work on heavily scratched surfaces. This polishing agent is the perfect solution for a car that requires special treatment.

The product is intended for machine polishing, using electric or pneumatic polishers at a speed of (1500 -2500 RPM).

However, it can also be used for manual polishing.

Can be used wet or dry.

Product advantages:

• Speed of sanding
• Ease of removing residue from the paste
• Minimal adhesion to surfaces

How to use:

• Scuff the surface with sandpaper of P1500 - P2000.
• We recommend using the machine sanding technique (with a polisher at traditional parameters - 1500-2500 RPM) with sanding discs of P1500, followed by micro-abrasive paper in the form of P3000.
• Before use, shake the bottle to thoroughly mix the ingredients.
• Apply the paste to the polishing sponge and directly to the element.
• For machine use - a hard polishing sponge is recommended (if it turns out that the sponge is too hard for the surface - use a medium sponge instead).
• It is important to start with medium pressure of the sponge on the surface and gradually reduce it. Remember not to rub the paste in to the very end, as this may lead to damaging the car paint.
• Excess polishing paste should be wiped off with a clean microfiber cloth.