ITALKO

LIGHT PUTTY 1KG

ITALKO Light Putty -- A two-component putty designed for filling depressions and irregularities. Due to the use of lightweight fillers, it has a specific weight about 40% lower compared to typical putties.

It creates coatings with good adhesion to both primed and unprimed surfaces. It has high flexibility, allowing it to be used on elements susceptible to mechanical vibrations.

APPLICATION:

It can be applied on large surfaces, does not run or shrink during hardening. It is temperature resistant and works well with most paints and varnishes available on the market.

It is ideal for mechanical and manual sanding. For professional use in automotive painting.

It can be used on the following substrates:

• Steel
• Galvanized steel
• Aluminum
• Two-component acrylic primers
• Old paint coatings
• Polyester laminates

Support the Polish economy, buy Polish products.

USAGE INSTRUCTIONS:

1. Galvanized and aluminum surfaces should be previously scuffed with abrasive fleece.
2. Carefully mix the components, maintaining proportions (it is recommended to use a dispenser for putties), apply using spatulas.
3. Apply the putty on a sanded, cleaned, and degreased substrate. The thickness of a single layer should not exceed 4-5 mm.
4. Between applications, take breaks to allow solvents to evaporate.
5. Galvanized and aluminum surfaces should be previously scuffed with abrasive fleece.

Note! Do not use at temperatures below 10˚C.

TECHNICAL DATA:

• Temperature/Usable hardness: at 20°C -- 20min, at 60°C -- 10min
• Shelf life (from the moment of mixing with the hardener): From 4 to 6 min. at 20˚C.
• Color: WHITE.