FARECLA G3 POLISHING PASTE 1KG

REGULAR GRADE

The polishing paste FARECLA G3 is the most versatile polishing paste designed for manual and mechanical polishing of paint.

After a single use, the polishing paste G3 permanently removes marks and scratches left by sandpaper, providing a high-quality shine and leaving the surface free from smudges.

Typically, after using G3 Regular Grade, the polished surface does not require further work.

Properties:

• refreshes old, oxidized paint
• removes light scratches and paint blemishes
• removes paint defects: streaks, orange peel
• removes traces of bird droppings, dust, and dirt
• helps in renewing headlights

The G3 paste is suitable for many types of surfaces including:

• medium concentration, air-dried, and low-temperature
• cellulose
• industrial paints
• fiberglass reinforced plastics and derivatives
• acrylic and other plastic surfaces
• furniture
• synthetic surfaces.

Usage instructions:

Surface preparation:

• ensure that the surface has been properly finished at the factory, is clean, and free of wax
• where necessary, remove surface defects with sandpaper

Restoring shine with a machine:

• using a cloth, apply a small amount of G3 polishing paste to the paint surface
• soak the G-Mop in clean water and attach it to the polishing machine, spin out excess water until no splashing is felt
• move the G-Mop across the paint surface in a linear motion - add G3 paste if necessary
• keep the G-Mop moist - if necessary, add water from a spray bottle

Hand polishing restoration:

• using a damp cloth, apply a small amount of G3 polishing paste to the paint surface
• rub the paste vigorously in forward and backward motions
• regularly change direction to ensure even coverage

Final finishing:

• remove excess paste with a clean cloth
• finish using only light pressure and water
• polish the paint surface with a soft cloth/microfiber to achieve a high gloss without streaks