BODY PROTECTION AGENT 1KG

BRAND BLUE-CAR

The body protection agent is based on synthetic resins.

After drying, the layer is flexible and resistant to impacts from gravel, stones, water, salt, greases, and oils, characterized by a fine-grained structure.

The product shows very high resistance to abrasion, which means long-lasting and effective protection of the car against corrosion and allows for longer and trouble-free use. It has soundproofing properties.

After complete drying, it can be covered with any topcoat.

Used for protection of:

• sills,
• bumpers,
• spoilers
• other elements of the car body.

How to use:

• The body protection agent can be easily applied using a conservation gun.
• Thoroughly clean and degrease, then dry the areas to be covered.
• Corroded areas are recommended to be covered with an epoxy primer with anti-corrosive properties.
• Adjacent surfaces should be covered with masking paper.
• Before use, shake the container well for about 3 minutes.
• The best results are achieved at a pressure of 4 to 6 atmospheres.
• Optimal coating thickness: about 1 mm.
• Do not spray on exhaust system components, engine, transmission, and suspension system.
• The surface can be painted after about 3 hours.
• In the case of water-based paints – after about 24 hours.