REPAIR KIT 250G

BLUE-CAR BRAND

The kit consists of:

• polyester resin
• hardener
• glass mat

Designed for filling significant material losses in automotive bodies, boats, trailers, etc. and for reinforcing and stiffening the repaired elements' structures.

Characterized by high elasticity and short curing time.

Once cured, it has very high mechanical strength and can be sanded and covered with any polyester fillers.

Applicable substrates:

• steel
• wood
• metal
• polyester laminates
• aluminum
• old paint coatings

Do not apply directly to reactive primers and single-component acrylic and nitrocellulose products.

HOW TO USE:

1. Surface preparation: Degrease, sand, and clean the treated surfaces. Degrease again and then dry thoroughly.
2. Preparing the glass mat: Prepare an appropriate piece of glass mat so that it overlaps at least 2 cm beyond the damaged area.
3. Preparing the resin: Mix thoroughly to achieve a uniform color 100 weight parts of polyester resin with 2-3 weight parts of hardener. Application time after mixing with hardener is 10-15 minutes at 20°C. Do not exceed the recommended amounts of hardener.

Application:

1. Apply the resin mixed with hardener to the cleaned area using a brush.
2. Apply the mat, press down, and saturate with resin using a brush. Depending on the damage, several layers can be applied. Minimum working temperature is 10°C. Do not pour unused mixed resin back into the can.

Drying time:

45 minutes/20°C. After curing, the laminate surface can be mechanically processed or leveled with polyester filler. Temperature below 20°C extends drying time.

Sanding:

Preliminary sanding should be done with P80-P120 sandpaper.

Storage:

Store in original packaging, tightly closed, in a dry, cool place away from heat sources and ignition, at a temperature of 5 to 20°C. Do not expose to direct sunlight.