BLUE-CAR LIGHT PUTTY 1KG

Two-component putty designed for filling dents and irregularities. Thanks to the use of lightweight fillers, it has a specific weight lower by about 40% compared to typical putties.

It creates coatings with good adhesion to primed and unprimed surfaces. It has high flexibility, allowing it to be used on elements susceptible to mechanical vibrations.

APPLICATION:

It can be applied to large surfaces, does not run and does not shrink during hardening. It is resistant to temperatures, works well with most paints and varnishes available on the market.

It is ideal for mechanical and manual sanding. For professional use in automotive painting.

It can be used on the following substrates:

• Steel
• Galvanized steel
• Aluminum
• Two-component acrylic primers
• Old paint coatings
• Polyester laminates

Support the Polish economy, buy Polish products.

HOW TO USE:

1. The galvanized and aluminum surface should be previously matted using abrasive fleece.
2. Carefully mix the components, maintaining proportions (it is recommended to use a dispenser for putties), apply with spatulas.
3. Apply the putty to the sanded, cleaned, and degreased substrate. The thickness of a single layer should not exceed 4-5 mm.
4. Between applications, take breaks to allow solvents to evaporate.
5. The galvanized and aluminum surface should be previously matted using abrasive fleece.

Note! Do not use at temperatures below 10˚C.

TECHNICAL DATA:

• Temperature/Working hardness: at 20 C -- 20min, at 60 C -- 10min
• Shelf life (from the moment of mixing with the hardener): From 4 to 6 min. at 20˚C.
• Color: White.
• For 1kg of putty, use 20-30g of hardener.